Thread: 67 camaro multileaf conversion
-
04-18-2005 10:55 PM #1
67 camaro multileaf conversion
basically, i wanna upgrade from mono to multi, is there any multilead suspensions from other cars more common at the junk yard that would directly bolt on to my 10bolt? thanks
-
Advertising
- Google Adsense
- REGISTERED USERS DO NOT SEE THIS AD
-
05-11-2005 04:10 PM #2
I'm guessing that the lack of replies is because leaf springs from a junk yard is not a good idea.
However, these should be suitable donor options:
Web snippet>
These are a brand new pair of aftermarket 5 leaf replacement rear leaf springs for:
chevrolet camaro / camaro z 28
Pontiac Firebird / Trans Am
68-81 Chevrolet Nova
68-81 Pontiac Phoenix
68-81 Buick Skylark
68-81 Pontiac Ventura
68-81 Oldsmobile Omega
These springs measure from center bolt to each eye 25 inches and 31 inches.
End Web Snippet<
Here's a new pair to consider -
Not sure what the shipping might be.
https://www.scottschevyparts.com/cgi...rchResult.html
BertLast edited by SBC; 05-11-2005 at 06:55 PM.
-
05-12-2005 04:36 PM #3
shit, one day too late, I just bought a pair from a wrecker, I havent picked them up yet, and i will inspect them very very carefully for warping and cracks.
now, once i try and mount them, will i need new plates or can i reuse the same plates from my mono, right now the top and bottom plate touch and if i reuse them, i will need longer bolts but there will be a half in gap, at least inbetween the top and bottom.
The Australians have finally discovered the origin of the word 'Vegan.' Apparently it's an old Aboriginal word for 'Bad Hunter.'
the Official CHR joke page duel