Thread: Mustang II VS. C4 Corvette IFS

Tweet

no , some had the torsion bar. a couple had the wider lower aframe . the problem is the thin plate they weld together for a crossmember. most are 1/8 in plate welded together than ground down smooth . i refuse to even install or work on one any more.
this one came from edwards 37. i bought the car in 94 and it already was a roller . not home made or cheap . i wont mention the mfg. but it busted out the frame first so we put plate on it and the extended a-arm to get him through summer. then i cut it off and used a fatman stub.
you can see the chaulk marks where i welded the cracks. there has been many failures and injuries over these things.