Thread: How to hook-up gas gauge??
Results 1 to 15 of 28
LinkBack URL
About LinkBacksThreaded View
-
10-11-2004 04:02 PM #13
CHR Member
- Join Date
- Apr 2004
- Location
- Little Elm
- Car Year, Make, Model: 34 Ford Low Boy w/ZZ430 Clone
- Posts
- 3,890
Man, that is LOOOOW. Are the tanks snugged up against the frame as far as the'll go? I had poly saddles on my "A" sedan, and the bottom of the saddles was level or slightly above the bottom of the running board.
By the way, I noticed that you don't have washers on the outside of your 4-bar rod ends. Are you running that way, or is this a mockup? If you're running that way, you should put washers on for safety reasons. If the ball fails, the washer will keep the whole end from detaching with possibly unpleasant results. If it's a mockup, don't forget 'em later on.Last edited by Henry Rifle; 10-11-2004 at 04:05 PM.
Reply With Quote
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
Either return this forum to what was or get the HELL OUT!
Dead!