Welcome to Club Hot Rod!  The premier site for everything to do with Hot Rod, Customs, Low Riders, Rat Rods, and more. 

  •  » Members from all over the US and the world!
  •  » Help from all over the world for your questions
  •  » Build logs for you and all members
  •  » Blogs
  •  » Image Gallery
  •  » Many thousands of members and hundreds of thousands of posts! 

YES! I want to register an account for free right now!  p.s.: For registered members this ad will NOT show

 

Thread: Fuel Pressure Question..help Pl's
          
   
   

Results 1 to 4 of 4

Threaded View

  1. 08-23-2004 05:25 PM #1
    DHOTROD's Avatar
    DHOTROD
    DHOTROD is offline CHR Member
    Visit my Photo Gallery
    Join Date
    Aug 2003
    Location
    LOS ANGELES. CALIF.... Blvd of broken dream's.
    Car Year, Make, Model: 31 Ford Cpe....Chicken Sh#t Yellow
    Posts
    243

    Question Fuel Pressure Question..help Pl's

     



    Hi there, I have a question, and I just want to be sure before I have problems. Here go's.... I'm running a 3x2 setup with Holly 94's....I've blocked off the secondary carbs and running just the primary carb, with a electric fuel pump and getting ready to install a fuel pump pressure regulator.
    The first question is; Should I run the p/r right after the fuel pump, or up by the fuel block? or does it even matter?
    And the second question is; Should I set the f/p at 2.5-3 psi or less. This carb was just compleatly gone through, new shafts, seals, bushings, flow benched, the whole enchalada....I just want to be sure on the pressure.
    Thanks for your help.....
    Last edited by DHOTROD; 08-23-2004 at 07:14 PM.
    Reply With Quote Reply With Quote

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Forum Rules

Links monetized by VigLink