Results 1 to 4 of 4
LinkBack URL
About LinkBacksThreaded View
-
08-23-2004 04:25 PM #1
CHR Member
- Join Date
- Aug 2003
- Location
- LOS ANGELES. CALIF.... Blvd of broken dream's.
- Car Year, Make, Model: 31 Ford Cpe....Chicken Sh#t Yellow
- Posts
- 243
Fuel Pressure Question..help Pl's
Hi there, I have a question, and I just want to be sure before I have problems. Here go's.... I'm running a 3x2 setup with Holly 94's....I've blocked off the secondary carbs and running just the primary carb, with a electric fuel pump and getting ready to install a fuel pump pressure regulator.
The first question is; Should I run the p/r right after the fuel pump, or up by the fuel block? or does it even matter?
And the second question is; Should I set the f/p at 2.5-3 psi or less. This carb was just compleatly gone through, new shafts, seals, bushings, flow benched, the whole enchalada....I just want to be sure on the pressure.
Thanks for your help.....
Last edited by DHOTROD; 08-23-2004 at 06:14 PM.
Reply With Quote
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
".......So sanded it all down and resprayed. ......" Been there. done that on a couple of paint jobs over the years. Usually took me a couple of days to get over being mad before I started...
Stude M5 build