Hi Guys,

I'm trying to plumb my brake system and none of my fittings.....fit. The residual valves, proportioning valve, brake switch all were ordered with 1/8 npt fitting. So natuarly I ordered 1/8 npt to 4 AN fittings from jegs. Well I get maybe 1 turn and the fitting just stops. I need fittings for the Wilwood calipers a well and the instructions state the thread pattern is 1/8 27 npt. So I went to my hose and rubber supply and was told that all 1/8 npt are 27 thread. They gave me one of their fittings and it's the same story, 1 turn and just stops.

My last resort is to order the Wilwood brand 1/8 27 fitting which are $5 a piece betting the a 1/8 27 npt is different than 1/8 npt. But I thought I would try here first. Anyone have any experience with the 1/8 npt to AN fittings? Am I suppose to just get a wrench and start turning? I would hate to strip my new calipers.

Any Ideas?

Dust
a