Quote Originally Posted by pat mccarthy View Post
yep i seen it fall off and i will not run any of the endura stuff thru my jet washer or power wash it as it falls off . the best thing you can do is blast it and get it powder coated i seen some of this fall after time around bolt holes .i use at the shop on new or used intakes in sliver acrylic lacquer 2 very lite coats and still looks like blasted clean aluminum .engine rebuilders sell paint well lke sSiver seal or Goodson . the gold color on the intake is a corrosive protection and many companys use it on there aluminum parts if in marine use .take some time blowing out the intake out to get what ever you blast it with sand //glass out of it it the last thing i care to do is blast clean engine parts. intake s are to bad as the on seams of sand to hang on like oil pans double or over lap seams were sand gets mix in with oil
Glad to see you Pat......

.