7Likes
Thread: Chevy Outer Tie Rod Ends
Results 1 to 6 of 6
LinkBack URL
About LinkBacksThreaded View
-
12-02-2014 09:32 PM #3
CHR Member
- Join Date
- May 2003
- Location
- Zephyrhills, Florida, USA
- Car Year, Make, Model: '32 Henway
- Posts
- 12,423
Different tie rod ends have different tapers on them, so you have to be real careful. The taper is measured in inches per foot or degrees of taper. Here's a 1 1/2 inches per foot reamer.....which has a 7.15 degree taper to it......
http://www.xkut-reamers.com/catalog/web5954.jpg
If you mix and match without taking the taper of the ball joint and the hole it is going into consideration, you could put together a death trap.Last edited by techinspector1; 12-02-2014 at 09:36 PM.
PLANET EARTH, INSANE ASYLUM FOR THE UNIVERSE.
Reply With Quote
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
This site is up more often lately, but very little traffic.
Dead!