Welcome to Club Hot Rod!  The premier site for everything to do with Hot Rod, Customs, Low Riders, Rat Rods, and more. 

  •  » Members from all over the US and the world!
  •  » Help from all over the world for your questions
  •  » Build logs for you and all members
  •  » Blogs
  •  » Image Gallery
  •  » Many thousands of members and hundreds of thousands of posts! 

YES! I want to register an account for free right now!  p.s.: For registered members this ad will NOT show

 
Like Tree4Likes

Thread: Fuel Tank Reconditioning
          
   
   

Reply To Thread
Page 1 of 2 1 2 LastLast
Results 1 to 15 of 17
  1. #1
    August Mariner's Avatar
    August Mariner is offline CHR Member Visit my Photo Gallery
    Join Date
    May 2014
    Location
    Lafayette
    Car Year, Make, Model: 35 Ford, 67 Jeep Gladiator
    Posts
    258

    Fuel Tank Reconditioning

     



    Has anyone used: Northern Factory RW125-9 Automotive Fuel Tank Liner Kit (About $55) to seal there gas tank. Most kits I have found are for 5 Gal. and are more expensive + I would need 4 times as much? I have read to cut the tank in half (filled with water) clean it and then weld back together. Just buy $400 tank? What is the common solution? Thanks in advance.
    The truth is incontrovertible. Malice may attack it, ignorance may deride it, but in the end, there it is.

    Winston Churchill

  2. #2
    shine's Avatar
    shine is offline CHR Member Visit my Photo Gallery
    Join Date
    Nov 2003
    Location
    bluff dale texas
    Car Year, Make, Model: 47 inderweed
    Posts
    2,126

    if i use an old tank i have it vatted . but there is no sealer i would ever use . if you clean it there is no need for it .

  3. #3
    August Mariner's Avatar
    August Mariner is offline CHR Member Visit my Photo Gallery
    Join Date
    May 2014
    Location
    Lafayette
    Car Year, Make, Model: 35 Ford, 67 Jeep Gladiator
    Posts
    258

    Please, what is vatted? I looked it up and kept getting: to place in a vat. I have read about vinegar and ball bearings or screws rolled around for a couple days.
    The truth is incontrovertible. Malice may attack it, ignorance may deride it, but in the end, there it is.

    Winston Churchill

  4. #4
    Dave Severson is offline CHR Member/Contributor Visit my Photo Gallery
    Join Date
    Jul 2003
    Location
    Madison
    Car Year, Make, Model: '67 Ranchero, '57 Chevy, '82 Camaro,
    Posts
    21,160

    I've use the POR 15 fuel tank cleaner and sealer, seemed to do a good job. The old "system" I've also had success with is to shatter a side window out of a car, put the pieces in the tank and shake/roll/agitate the tank with all those super sharp shards of glass in it....Kind of tough to get all the glass out of the tank but it sure does do a heck of a good job cleaning the rust and other crud out of an old tank!
    rumrumm, shawnlee28 and MelloYello like this.
    Yesterday is history, tomorrow is a mystery, Live for Today!
    Carroll Shelby

    Learning must be difficult for those who already know it all!!!!

  5. #5
    Big Tracks's Avatar
    Big Tracks is offline CHR Member Visit my Photo Gallery
    Join Date
    Aug 2005
    Location
    Keller
    Car Year, Make, Model: '79 Dodge Diplomat Coupe
    Posts
    832

    Take it to a radiator shop and tell them "fix it". They can do it. They can also repair any pin-hole leaks that have a way of appearing on the top of the tank above the fuel. I have done the sloshing routine to coat the inner surface and believe me, its a real pain.

    Jim

  6. #6
    August Mariner's Avatar
    August Mariner is offline CHR Member Visit my Photo Gallery
    Join Date
    May 2014
    Location
    Lafayette
    Car Year, Make, Model: 35 Ford, 67 Jeep Gladiator
    Posts
    258

    OK. Thanks for all the great ideas!
    The truth is incontrovertible. Malice may attack it, ignorance may deride it, but in the end, there it is.

    Winston Churchill

  7. #7
    shine's Avatar
    shine is offline CHR Member Visit my Photo Gallery
    Join Date
    Nov 2003
    Location
    bluff dale texas
    Car Year, Make, Model: 47 inderweed
    Posts
    2,126

    rad shop or a machine shop will have a vat to strip parts. one thing to remember. if you use a sealant and it fails your toast. tank is junk , fuel lines to filter clogged. i just see no reason for sealant once tank is clean .

  8. #8
    August Mariner's Avatar
    August Mariner is offline CHR Member Visit my Photo Gallery
    Join Date
    May 2014
    Location
    Lafayette
    Car Year, Make, Model: 35 Ford, 67 Jeep Gladiator
    Posts
    258

    OK. I am going to try and clean it with screws and Vinegar, dry it thoroughly, lastly put 120 lbs of pressure in it and see if it holds. Thanks Shine...
    The truth is incontrovertible. Malice may attack it, ignorance may deride it, but in the end, there it is.

    Winston Churchill

  9. #9
    rspears's Avatar
    rspears is offline CHR Member/Contributor Visit my Photo Gallery
    Join Date
    Sep 2007
    Location
    Gardner, KS
    Car Year, Make, Model: '33 HiBoy Coupe, '32 HiBoy Roadster
    Posts
    11,124

    Stabil has a new product, Stabil 360 that is marketed targeting fuel system corrosion caused by ethanol breaking down in the system. For an older tank that's known to have been rusty it might be some insurance. Not sure that it's needed, but I noticed the advertisement and their "oh no! " pictures.
    Roger
    Enjoy the little things in life, and you may look back one day and realize that they were really the BIG things.

  10. #10
    August Mariner's Avatar
    August Mariner is offline CHR Member Visit my Photo Gallery
    Join Date
    May 2014
    Location
    Lafayette
    Car Year, Make, Model: 35 Ford, 67 Jeep Gladiator
    Posts
    258

    OK Thanks. Amazon has some new tanks for older vehicles for as little as about $100 + -. They don't have an exact match but after I drop this tank I can look and see if one comes close as another option. The truck had an aluminum tank in the bed that was being used and from what the last owner is saying I think he was just getting a lot of dirty fuel so he installed the aluminum tank. Just been trying to shake all the bushes before I have regrets. I appreciate everyone's time and help.
    The truth is incontrovertible. Malice may attack it, ignorance may deride it, but in the end, there it is.

    Winston Churchill

  11. #11
    HWORRELL's Avatar
    HWORRELL is offline CHR Member Visit my Photo Gallery
    Join Date
    Oct 2003
    Location
    ST.LOUIS
    Car Year, Make, Model: 31 FORD 5 WINDOW,69 442, 305 sprint car,
    Posts
    1,410

    Quote Originally Posted by August Mariner View Post
    OK. I am going to try and clean it with screws and Vinegar, dry it thoroughly, lastly put 120 lbs of pressure in it and see if it holds. Thanks Shine...
    If you put a 120lbs of pressure in it, you'll need a new tank if you don't die wet !
    rspears likes this.

  12. #12
    rspears's Avatar
    rspears is offline CHR Member/Contributor Visit my Photo Gallery
    Join Date
    Sep 2007
    Location
    Gardner, KS
    Car Year, Make, Model: '33 HiBoy Coupe, '32 HiBoy Roadster
    Posts
    11,124

    Quote Originally Posted by HWORRELL View Post
    If you put a 120lbs of pressure in it, you'll need a new tank if you don't die wet !
    Wow, I didn't catch the pressure value, just rolled right over it without it registering Must be gettin' old! Yeah, If you can plug all of the holes and put a non-vented cap on it just set it out in the sun for an hour or so and if it gives you a "Woosh" when you remove the cap it's sound. That tank won't take more than about ten pounds of pressure without starting to bulge.
    Roger
    Enjoy the little things in life, and you may look back one day and realize that they were really the BIG things.

  13. #13
    cffisher's Avatar
    cffisher is offline CHR Member Visit my Photo Gallery
    Join Date
    Jan 2006
    Location
    Constantine
    Car Year, Make, Model: 57 chevy 2 dr wagon
    Posts
    9,476

    I must have missed it but what truck do you want a tank for?
    Charlie
    Lovin' what I do and doing what I love
    Some guys can fix broken NO ONE can fix STUPID
    W8AMR
    http://fishertrains94.webs.com/
    Christian in training

  14. #14
    sharpmark is offline CHR Member Visit my Photo Gallery
    Join Date
    Dec 2009
    Location
    rotorua/new zealand
    Car Year, Make, Model: 34 oldsmobile sedan
    Posts
    339

    I'm sorry,but I laughed when I saw the 120lb pressure test. most tyres would explode at that pressure so a petrol tank would have turned into a balloon and then exploded!!!!!!!
    I'm presuming he mean't 12lb.
    as roger said ---let the sun do the pressure test.
    good luck mate.


    .
    mark
    1969 chev C10 stepside-305/4speed/12bolt
    1934 oldsmobile sedan-350/350/12bolt
    1928 model a roadster-project-283/350/9"
    1924 dodge modified - 292 i6/pwrglde/quickchange rear

    "its only a hobby " --- no its not , its a lifestyle !!!!

  15. #15
    joecool is offline CHR Member Visit my Photo Gallery
    Join Date
    May 2013
    Location
    pacific junction
    Posts
    5

    I take the tanks off and strap them onto a portable cement mixer,put some diesel fuel in and a old chain off a chainsaw. Let it spin slowly and every once in a while change the angle with the mixer. It will knock all the rust off the inside . I clean it with acid,seal it with sealer I get from Speedway Motors. Caution ,do not leave the pickup and sending unit in it when you clean it. Best of luck

Reply To Thread
Page 1 of 2 1 2 LastLast

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Links monetized by VigLink