Printable View
http://i52.photobucket.com/albums/g2...psf87d2b3d.jpg
http://i52.photobucket.com/albums/g2...ps5c255f4b.jpg
I used the 4" cutting wheel for the wheel wells, Plasma cutters for the interior, and the sawsall on the A pillars. Final trim will be done after the delivery body is free from its floor and sitting in place.
Your a magician, a little nip and tuck with a sawzall and ya got a roadster K00L
Yeah I never saw that coming :eek::LOL::LOL:
OOPs... Oh, I mean Wallah! A little time on the English wheel, shrinker, stretcher, and this is what I came up with :cool: Could you imagine the coin I could be cranking in if I could pull that off? Id have 4 door Chevys lined up around the block! :LOL: Photobucket is killing me! Guess I better leave that up being you guys caught me poking the wrong buttons. That was the first half of last weeks project. I built the roll bar, dash, and installed the gages, finished off the floor and a boat load of other finishing touches, but that is for another day...
It's... It's... It's..... it's Magic! Hah. 8-)
Sometimes I feel like such a door knob! Oh well, I will pay more attention in the future I promise. Actually taking off some of Saturday and I just might take off tomorrow too. What a renegade! LOL
I TOLD this damn computer what I wanted it to do!!!!!! Ain't my fault it can't understand simple directions!!!!!!!!!!!!!!!!!!!!!!!!!!!
Well a partial Saturday off and all day Sunday felt pretty darn good... Long deserved! Any way Im 2 days behind now gotta get after it again! :LOL:
http://i52.photobucket.com/albums/g2...psa30ed3c8.jpg
http://i52.photobucket.com/albums/g2...ps4161338c.jpg
It looks cold and damp there today.. but in the lower picture I noticed da sun came out...**)**):whacked::p:LOL:
hello I have 1940 dodge sedan and want to know if body will fit on a 1996 s10 4door blazer frame
Hey, I'm a little late to the party but it looks like there's still lots of fun to be had!:D:D
Bob are the front doors or the 4dr the same as the doors on the delivery? If so, that makes this whole thing look fairly simple....on paper, at least!! Very clever way to do the swap and to have that lift would be awesome!! Nice work! I'm now signed up for the next installment....:3dSMILE:
My first guess is yes but im not an expert or S10's or 40 Dodges.... to me its the challenge of making it fit. Do some wheel base measurements and go for it!Quote:
Originally Posted by picupman34
Partys I attend its fashionable to be late... unless there is beer involved in which case I try to be 1/2 hour early or so. My buddys are always reminding about the sign I have on the wall so I gotta get into the beer early... http://i52.photobucket.com/albums/g2...psb64aba51.jpgQuote:
Originally Posted by randyr
First thing I did was change the passanger door before I got busy. Exact same size even though the body belt lines are very different. I can do the switcharoo cut and paste thing and make that look normal. Here is todays undertakings...
http://i52.photobucket.com/albums/g2...ps6e55c88d.jpg
http://i52.photobucket.com/albums/g2...psc7cfc9ed.jpg
http://i52.photobucket.com/albums/g2...ps1137dc33.jpg
http://i52.photobucket.com/albums/g2...ps2d6d5cc9.jpg
http://i52.photobucket.com/albums/g2...ps35ab7fd5.jpg
A late night tonight... My son was using the shop to build some new rear tube fenders for his Jeep so I hung around and helped him. I set the delivery body on the old 4 door floor tonight to get it out of the way. Tomorrow I will do some final trimming and hopefully by tomorrow afternoon start welding it back together... :eek:
http://i52.photobucket.com/albums/g2...pscbdd9952.jpg
http://i52.photobucket.com/albums/g2...psea785ee2.jpg
http://i52.photobucket.com/albums/g2...ps10406fb8.jpg
Very good work sir, and really fast I must say too!