I've got 6" rims now but I think 4.5" would look better and maybe even run better.
Your opinions are welcomed.
George
Printable View
I've got 6" rims now but I think 4.5" would look better and maybe even run better.
Your opinions are welcomed.
George
Some people will be all over the subject about big and littles---
Something very basic that you need to think about is that you have a front heavy, very powerful car---most of the braking to slow/stop that car is done by the front wheels----you need to stay with the 6 inch wheels and maybe change the back spacing/offset if its not running too good
I agree with Jerry............you have alot of weight on the front end. Besides I really like the look with those gasser style wheels on it. Leave them on and just drive it.
was there a reason for changing other than appearance? hard to beat perfection I think, that's one bad a$$ ride in my eye's.
I'm running 4.5x15 Cragar's with Firestone F560's, and probably should be 5.5" to 6" for better handling at speed, plus the only place I can get the tires is from Coker. I'd stick with the wheels you've got up front.
What's your overall diameter difference, back to front? The drop does more for the look than the width of the fronts, IMO.
Yes that is an awesome looking car, but , look guys, it never leaves the garage so he could put bicycle wheels on the front and be safe as he either polishes the inside of the exhaust each time he has run that engine or he is using a fuel nobody has seen before.
Just my sense of humor again so please don't be upset, I like the wheels you have on it now.
Just my opinion, but I'd sure never give up the improved handling and braking of a wider tire just for an alleged better look!!!
Thanks Green!!!!Quote:
Originally Posted by green34ford
Whiplash,,,Your always good for a laugh!!
Actually,,I do drive this rod a lot,,just took it to 4 car shows in the last month,,one of them being about 70 miles form home,,I know that's not so far,but with the suspesion set-up this thing has,,it's not always so pleasent to drive over the many "potholes' in So. Cal,,if I hit a big one doing 70mph on the highway,,I bound to really bust something up!!
Take care
So what drop do you have now? Just thinking that you might want to consider a larger diameter rear tire?Quote:
Originally Posted by rspears
I like what you have on there now, they look great!
You will never get short wheelbase cars like we have to give you a really comfortable ride. You can tune the suspensions to some degree but they will never ride like a passenger car. Bumps are just a part of owning one.
I agree,,I changed the coilovers in back with some nice adjustable "Ridetechs" and it made a little improvment,,,,no matter,,I love driving this Rod!!Quote:
Originally Posted by rumrumm
Not to hijack the thread, but I was reading through the information in the December 2012 Street Rodder on the new VooDoo Hot Rods carbon fiber '32 roadster on their own space frame chassis, and they pointed out that the key to better ride and handling is increasing the suspension travel, which is limited to an inch or two on a "traditional" setup with leaf spring front & coilover rear. Not sure I'm ready for a tube chassis street rod, but they may be the next step in the evolution....Quote:
Originally Posted by rumrumm
Why do you think you will break something hitting a bump? Unless you have a Chinese cast iron front axle or spindles or something, that cross spring front is tough!
I'd leave the 6" wide wheels if I were you. I have 4.5" on my corvette and it can be difficult to brake in some conditions as in the frotn tires like to lock and skid. I have a heavy front as well and am going to go wider on the fronts to help out more.
It's fun to change things, I think you would like the 4.5s. They are great looking wheels opens the view.
Attachment 56640
Attachment 56641
Attachment 56642
Pepi,,what size wheels are those and and what brand and size are the ties,,thanks!
1bad32.. The wheel is 15in, the tires are MTs link below.
Mickey Thompson Sportsman S/R Tires 6652 - SummitRacing.com
Cheers!
Unless you have clearance issues like we had with the Thames, I would recommend staying with wider wheels .......... the 4" ET's we had to use get a little "light" at high speeds :rolleyes::3dSMILE::rolleyes:
http://i74.photobucket.com/albums/i2...hames/BB06.jpg
http://i74.photobucket.com/albums/i2...hames/BB07.jpg
And not to mention if you get caught in the rain they suck for handling. Especially with huge rear tires. :)
