Thread: Torque angle wrench?

Tweet

snap on dig. with back up beeper thats a joke on the back up beeper part and Sk yes cdi make snap offs i use rod stretch gauge as for tq angle is ARP telling you that ? if not then you better do the rods with there moly past and there TQ and stretch .the rods should have bolts in them or this the bolt a upgrade to your stock rods ? if so the rods may need to be cut for the crank as the radii chamfer can hit the crank bolt upgrade the rod big end should be checked for size .i do not care what any ones tells you this should be checked

Pat,

Knew you'd answer Pat! Thanks. Your mailbox is full. I was going off of information I found the LS1 site. I'll see if I can find it again. Seems like everything with any torque value to it gets angle torqued.

Keith,

I bet your right. Figured I might as well get one.


David

yep that box ... i think is not full ?so some thing is up with it