Thread: Coolant sludge - why??
Hybrid View
-
02-22-2012 04:58 AM #1
Usually the first thing that pops up in this type discussion is leaking head or intake gasket, but that may not be it.
Why not get on the horn to the Prestone customer service line and play 20 questions with them?Your Uncle Bob, Senior Geezer Curmudgeon
It's much easier to promise someone a "free" ride on the wagon than to urge them to pull it.
Luck occurs when preparation and opportunity converge.
-
02-22-2012 05:35 AM #2
Bob - It would really upset me if my $$$$ Fel Pro Performance level gaskets were leaking. There are no indicators - slimy/greasy coolant or milky oil nor was there any loss of either.
I put a bunch of hot water through the engine yesterday - until the flow ran clear so what I think I'll do is keep an eye on it this spring - and with the added petcocks, it's easy to dump a small amount, and if it continues, harass Prestone and/or Peak as I really don't recall which I have installed as I have jugs of both.
Also, after doing a quick Google, this is not an unusual occurrence, and much worse with GM's Dex Cool.Dave W
I am now gone from this forum for now - finally have pulled the plug
Well to be as brief as I can the first shoot of color looked good but when I started spraying the clear I discovered all these paint flakes on the hood and back of cab. The 3m plastic sheeting I was...
Stude M5 build