Well I can get to the crease if I cut some of the bracing out where the rear window rolls up. Now just the thought. The car is up on blocks, so it won't move. I was thinking of taking a 2x4 and nailing on a pice of sheetmetal that is formed around it and nailed to the sides. I could then push it against the crease, and wedge it against the garage wall. Then lightly hammer on both sides of the crease to try to drive it out to near flussh.. I have already slid a bar down the window channel and tried to pry on it while heating the sides, but that didn't help either.. I will probably find out in that book when it comes..