Thread: Radiator too tall

Tweet

Tom,
I ran into a similar issue on mine, but tied to laying the top back for both hood fit and looks. I was able to simply take off the flat panel shroud and turn it 180degrees, biasing my fan to the bottom vs the top and I picked up the necessary clearance. Might be worth a test fit?

Dave, I'm not sure what you mean by changed the angle from the firewall to the radiator. I want it to be the same. With the new radiator I can pretty much set it at the height I need and then modify (shorten) the shell to fit.

Originally Posted by TomJ

Dave, I'm not sure what you mean by changed the angle from the firewall to the radiator. I want it to be the same. With the new radiator I can pretty much set it at the height I need and then modify (shorten) the shell to fit.

Possibly I misunderstood you.

What I was saying is that if you move the radiator/shell forward a couple of inches you will change the angle from the firewall to that radiator