Threaded View
-
08-25-2011 12:34 PM #1
Power Hook up for welder and air compressor.
Ok guy's I want to hook up power for my 230 welders and my 230 air compressor.
In my main power box I only have a place for 2 breakers then it will be full.
I want to run some wire from the two new breakers outside to a seperate little
breaker box then run two seperate wires out from there to 2 - 230 plugs.
What size breakers should I run, out from the main breaker to the small breaker box.
Then what size breakers should I run for each plug? {50} times two for one plug???
I forgot I am just going thru the wall and over about 5 or 6 feet.
I have some wire that I had from florida when I ran a 200ft. run for my welders,
so it's some healthy stuff about as thick as my wrist.
Thanks KurtLast edited by vara4; 08-25-2011 at 12:42 PM.
I won't agree or disagree on your opinion of comp cams, but when I put a new cam in the 350 in my 76 Vette I went with Howard's and have not been disappointed. With the junk coming out of China these...
New guy from Utah.