Thread: Stopped by the machine shop today.

Tweet

Originally Posted by Itoldyouso

They were pretty proud of that brush attachment and made me feel it. Glad you do the same thing, that is encouraging. The guy has some nice machinery in there, from what I could see. As I mentioned before, they also have an engine dyno and a chassis dyno, so it looks like they are serious about their work.

He also told me they are going to mildly chamfer (if that is the right word) the top edge of the cylinders to take the sharp edge off and make putting pistons and rings down in there easier, with less chance of catching one on the edge. That made sense to me too.

Don

well they should be that brush is alot of coin for that machine . just a note here you can over brush the walls . the midly chamfer is a thing i do on every bore less its still there from stock like the sbc have way to much.you should ask him if he breaks the edge off the bottom of the bores thats the one is were many guys screw up

..they do not do it ..