Thread: Welding Question
Threaded View
-
07-19-2011 01:52 PM #1
Welding Question
I'm fabbing some new railing sections for our deck, getting rid of all of the wood but using my existing spindles that were 1/2" rigid conduit which is galvanized. They are getting welded between a pair of 1/2x1.5" C channels, top spindle inside the C, bottom atop the C (open sides of the channels face down so they don't collect rain). My question is welding the galvanized pipes. I'm running them across the belt sander about 1/2" up on each end to clean metal, but the galvanizing is inside, too. I know the heat from welding creates a weak cyanide gas in the fumes. Am I OK just keeping a fan pushing all the fumes away from me or do I need to take other precautions? Never welded on galvanized metal before....Roger
Enjoy the little things in life, and you may look back one day and realize that they were really the BIG things.
Welcome to CHR. I think that you need to hook up your vacuum advance. At part throttle when cruising you have less air and fuel in each cylinder, and the air-fuel mixture is not as densely packed...
MSD 8360 distributor vacuum advance