-
07-18-2011 07:56 PM #1
Help with Power Steering pump belt tensioner, PICS ADDED
Help, I was changing the belts on the 41 today and the power steering belt tensioner nut came off stripped, luckily i wasnt driving as the pulley would have torn stuff up if it went bouncing around.
So, if i describe it, maybe someone can tell me where and what kind it is, i will take a pic tomorrow if need be.
PS pump on drivers side, regular belts, not serpentine.
a L shaped bracket hangs off the PS pump. long slot in the long part of the L, hole for bolt on the bottom part of the L
A shaft goes through the long part of the L, the tensioner pully goes on the outside of the L, with a nut holding it to the shaft.
There is a bolt that goes up from the bottom part of the L, into a threaded hole in the shaft, tighening or loosening the bolt allows the shaft to move up and down, reducing or adding tension to the belt via the pulley.
Anybody know where i can get one? Pics needed anyone?
Last edited by rp23g7; 07-19-2011 at 09:31 AM.
Girls love Hot Rods too
-
Advertising
- Google Adsense
- REGISTERED USERS DO NOT SEE THIS AD
Welcome to Club Hot Rod! The premier site for
everything to do with Hot Rod, Customs, Low Riders, Rat Rods, and more.
- » Members from all over the US and the world!
- » Help from all over the world for your questions
- » Build logs for you and all members
- » Blogs
- » Image Gallery
- » Many thousands of members and hundreds of thousands of posts!
YES! I want to register an account for free right now! p.s.: For registered members this ad will NOT show
Welcome to CHR. I think that you need to hook up your vacuum advance. At part throttle when cruising you have less air and fuel in each cylinder, and the air-fuel mixture is not as densely packed...
MSD 8360 distributor vacuum advance