Welcome to Club Hot Rod!  The premier site for everything to do with Hot Rod, Customs, Low Riders, Rat Rods, and more. 

  •  » Members from all over the US and the world!
  •  » Help from all over the world for your questions
  •  » Build logs for you and all members
  •  » Blogs
  •  » Image Gallery
  •  » Many thousands of members and hundreds of thousands of posts! 

YES! I want to register an account for free right now!  p.s.: For registered members this ad will NOT show

 

Thread: tranni conversion question
          
   
   

Reply To Thread
Results 1 to 9 of 9
  1. #1
    adametree is offline CHR Member Visit my Photo Gallery
    Join Date
    Mar 2011
    Location
    Birmingham
    Posts
    11

    tranni conversion question

     



    I want to put a TH350 trans in my 69 chevy. It has a manuel right now. I converted from an i-6 to a 350 engine and need a longer transmission. also don't want to deal with getting the clutch linkage, driveshaft mod, and all that to work.

    1. - Do they make a bracket that I can get to make the shifter on the floor (someone cut out a hole in the floor for manuel. guess they didnt like the column shift). so the only way the automatic would work would be to get a shifter to run through the floor

    2. Does the TH350 have to have cooling lines hooked up to it? if so is that a big deal to do?

  2. #2
    jyardgirl's Avatar
    jyardgirl is offline CHR Member Visit my Photo Gallery
    Join Date
    Apr 2007
    Location
    West Point, Virginia, United States
    Car Year, Make, Model: 1971 monte carlo
    Posts
    2,772

    do not know about question 1 but on question 2 the th350 does have cooling lines. they are pretty easy to do. you can get a kit from almost any auto parts store. just put in the fittings in the passenger side usually of the tranny and run your lines to the fittings on you radiator.
    BARB

    LET THE FUN BEGIN

  3. #3
    rspears's Avatar
    rspears is offline CHR Member/Contributor Visit my Photo Gallery
    Join Date
    Sep 2007
    Location
    Gardner, KS
    Car Year, Make, Model: '33 HiBoy Coupe, '32 HiBoy Roadster
    Posts
    11,047

    There's lots of floor shifters for auto's. Take a look at Lokar (while you're looking for your throttle cable ) for one example.http://www.lokar.com/product-pgs/shi...s-shifter.html

    For cooling, you will have to have a radiator with an internal transmission cooler, then like Barb says it is simply a matter of hooking up the lines from the transmission to your radiator connections.
    Roger
    Enjoy the little things in life, and you may look back one day and realize that they were really the BIG things.

  4. #4
    techinspector1's Avatar
    techinspector1 is offline CHR Member Visit my Photo Gallery
    Join Date
    May 2003
    Location
    Zephyrhills, Florida, USA
    Car Year, Make, Model: '32 Henway
    Posts
    12,423

    The factory installed a transmission fluid cooler in the bottom of the radiator, probably because the bean counters told the engineers to do it that way. You don't necessarily have to have a cooler in the bottom of the radiator to operate an automatic transmission. You can mount a dedicated cooler in front of the radiator and run the lines into and out of the cooler.

    The nice thing about the cooler in the bottom of the radiator though, is that the transmission fluid is kept at a fairly constant temperature commensurate with the temperature of the radiator cooling water. The advantage there is that the fluid does not get too cool. The fluid has to be up to temp (150-180 degrees F) in order to work correctly and a dedicated cooler in front of the radiator will not have the ability of moderating the fluid temp like a cooling circuit inside the radiator.
    PLANET EARTH, INSANE ASYLUM FOR THE UNIVERSE.

  5. #5
    jerry clayton's Avatar
    jerry clayton is offline CHR Member Visit my Photo Gallery
    Join Date
    Feb 2006
    Location
    Bartlett
    Posts
    6,831

    this would be better if we called it a heat exchanger-----unless your pulling a heavy load(slippage) the engine thermometer controls the trans temp

  6. #6
    42K3's Avatar
    42K3 is offline CHR Member Visit my Photo Gallery
    Join Date
    Aug 2006
    Location
    Redmond
    Car Year, Make, Model: 1942 IH K3
    Posts
    508

    I'd trade my 700R for your manual anyday.

  7. #7
    jumpinjackflash is offline CHR Member Visit my Photo Gallery
    Join Date
    Mar 2011
    Location
    Allentown
    Posts
    4

    Smile

     



    Speedway has 10 different bolt on floor mount shifters for your TH350. They also have universal trans coolers and install kits if your radiator doesn't have a bottom tank.
    JJF

  8. #8
    Bug
    Bug is offline CHR Member Visit my Photo Gallery
    Join Date
    Dec 2007
    Location
    Manteca
    Posts
    304

    Unfourtuatly you are making a bigger project out of this than it really is.
    These pickups came with V-8's and auto transmissions. You can get everything that you need from an after market vendor (such as LMC).
    Also you should be able to find everything that you need in a wrecking yard somewhere.

    There are also Chevy pickup forums that you can go to for advise on a particular item.
    http://forums.classictrucks.com/69/6...cks/index.html

    Here are a few aftermarket pickup places.

    www.ecklerstrucks.com
    www.lmctruck.com
    www.classicparts.com/chevy



    Edit:
    After reading my post, I might have sounded a little harsh. I did not mean to. If you have never done this type of swap before, it might be a bit overwhelming. I have done so many of these kind of swaps it is kind of second nature and sometimes I don't think about someone that might have never done one before.
    Last edited by Bug; 03-11-2011 at 02:30 PM. Reason: See edit info.
    Bug
    "I may be paranoid but that doesn’t mean they are not watching me"

  9. #9
    rspears's Avatar
    rspears is offline CHR Member/Contributor Visit my Photo Gallery
    Join Date
    Sep 2007
    Location
    Gardner, KS
    Car Year, Make, Model: '33 HiBoy Coupe, '32 HiBoy Roadster
    Posts
    11,047

    Quote Originally Posted by Bug View Post
    Unfourtuatly you are making a bigger project out of this than it really is. These pickups came with V-8's and auto transmissions. You can get everything that you need from an after market vendor (such as LMC). Also you should be able to find everything that you need in a wrecking yard somewhere.

    Here are a few aftermarket pickup places.

    www.ecklerstrucks.com
    www.lmctruck.com
    www.classicparts.com/chevy
    I agree with Bug. There's no reason you can't use your current manual tranny with stock parts. LMC is in my back yard, so visiting them would be easy for me, but I know that their guys do a great job on the phone.
    Roger
    Enjoy the little things in life, and you may look back one day and realize that they were really the BIG things.

Reply To Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Links monetized by VigLink