Welcome to Club Hot Rod!  The premier site for everything to do with Hot Rod, Customs, Low Riders, Rat Rods, and more. 

  •  » Members from all over the US and the world!
  •  » Help from all over the world for your questions
  •  » Build logs for you and all members
  •  » Blogs
  •  » Image Gallery
  •  » Many thousands of members and hundreds of thousands of posts! 

YES! I want to register an account for free right now!  p.s.: For registered members this ad will NOT show

 

Thread: Gearing Question
          
   
   

Results 1 to 14 of 14

Threaded View

  1. 12-25-2010 03:07 PM #1
    MrChips's Avatar
    MrChips
    MrChips is offline CHR Member
    Visit my Photo Gallery
    Join Date
    Aug 2010
    Location
    Coastal
    Car Year, Make, Model: 1937 Chevy Buisness Coupe
    Posts
    30

    Gearing Question

     



    Ok, so I need to get into the pumpkin, have way too much pinion slack. So while I am there I am going to get rid of the open 2.73's that are there. But I am not sure what to go back with.

    car is a 37 Chevy, 10 bolt 8.5" rear, 425 HP 406, 400TH tranny w/TCI Saturday Night Special torque converter. I know I am going back with a posi, but don't know if I want 3.42 or 3.73. Wish to keep it trip drivable without big RPMs at highway speed but want something more than 2.73's.

    Any thoughts??

    Brett
    Last edited by MrChips; 12-25-2010 at 03:10 PM.
    Reply With Quote Reply With Quote

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Forum Rules

Links monetized by VigLink