Printable View
Have a 1930 ford 2 door sedan just purchased and looking for anyone who know if the billet third brake lights have to be wired from brake switch.. the old third light now has a little circut box that is wired from the back tail lights to keep the 3rd light from flashing when the turn signal are on..anyone know where to get one of these devices?? Ronster
All Ya need a couple of relays and a few diodes...... but a new wire from the switch would be easier....... If ya want to do it email me and I make you a drawingQuote:
Originally posted by Ronster
Have a 1930 ford 2 door sedan just purchased and looking for anyone who know if the billet third brake lights have to be wired from brake switch.. the old third light now has a little circut box that is wired from the back tail lights to keep the 3rd light from flashing when the turn signal are on..anyone know where to get one of these devices?? Ronster
MM64 :cool:
www.greganti.com/rambler
Good advice - One more safety feature is to buy a blk box that makes the 3rd lite strobe. I added this to a friends streetrod & its effective in making cars back off.They are sold for motorcycles.(I wire in 1 wire out).
get the part off of a sport Escort with the third taillight in the spoiler, that might work for ya.
On the web I found a device that Isolates this problem of wiring off the Rear Tail Lights I think?? Ronster
Pacer 3rd Brake Light Logic Module (PCP.20-702)
Code: RA023-PCP129.4
Price: $7.99
Required when using single light as third brake light on vehicles which combine brake and turn signals into single lamp. Filters out turn signal in-out.
By Pacer.