Welcome to Club Hot Rod!  The premier site for everything to do with Hot Rod, Customs, Low Riders, Rat Rods, and more. 

  •  » Members from all over the US and the world!
  •  » Help from all over the world for your questions
  •  » Build logs for you and all members
  •  » Blogs
  •  » Image Gallery
  •  » Many thousands of members and hundreds of thousands of posts! 

YES! I want to register an account for free right now!  p.s.: For registered members this ad will NOT show

 

Thread: Welding stainless
          
   
   

Results 1 to 15 of 21

Threaded View

  1. 11-16-2010 11:13 AM #14
    pat mccarthy's Avatar
    pat mccarthy
    pat mccarthy is offline CHR Member/Contributor
    Visit my Photo Gallery
    Join Date
    Apr 2005
    Location
    bay city
    Posts
    10,546

    Quote Originally Posted by 35fordcoupe View Post
    I could try something like that Vara, but what do you guys think of just cutting the side of the round bar enough to fit up against the shifter, drilling two holes through it and calling it a day? I was figuring on 1/2" round bar. This Lokar shift lever doesn't seem any more elaborate than I would have by doing it this way.
    why not.. Hurst did it that way just flatten the round out so you have a bit of surface to grab to and use good bolts at least two 3/8 fine thread is what i would use
    Last edited by pat mccarthy; 11-16-2010 at 11:17 AM.
    Irish Diplomacy ..the ability to tell someone to go to Hell ,,So that they will look forward to to the trip
    Reply With Quote Reply With Quote

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Forum Rules

Links monetized by VigLink