Thread: Axle flange out of square.
Results 1 to 2 of 2
LinkBack URL
About LinkBacks-
02-13-2004 06:17 AM #1
CHR Member
- Join Date
- Oct 2002
- Location
- Vicksburg
- Car Year, Make, Model: 37 Ford 2dr. Sedan
- Posts
- 197
Axle flange out of square.
I am installing a rear disc setup on my 9". I placed the rotor on the flange, lugged it down, and setup a dial indicator touching the pad surface of the rotor. When I rotated the differential, the rotor showed 0.04" out of square. I then rotated the rotor relative to the axle and checked it again to see if the rotor or the axle flange was causing the problem. It's the alxe flange.
What should i do? Should I shim in between the rotor and the flange?Andy
My project build video:
http://www.youtube.com/watch?v=iubRRojY9qM
-
Advertising
- Google Adsense
- REGISTERED USERS DO NOT SEE THIS AD
-
02-13-2004 07:26 AM #2
CHR Member
- Join Date
- Apr 2001
- Location
- Salado
- Car Year, Make, Model: 32, 40 Fords,
- Posts
- 10,898
The proper thing to do is either have the axle straightened or get a new one. BTW the term is "runout" rather than square, it'll make more sense to the axle guys.Your Uncle Bob, Senior Geezer Curmudgeon
It's much easier to promise someone a "free" ride on the wagon than to urge them to pull it.
Luck occurs when preparation and opportunity converge.
Reply With Quote
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
I saw last night on fb about John. The world sure lost a great one. I'm going to miss his humor, advice, and perspective from another portion of the world. Rest in Peace Johnboy.
John Norton aka johnboy