Thread: I need some gauges help!

Tweet

Rrumbler; Whoa, I keep on showing my age (or ignorance)...Voltmeter it is!!!

NTFDAY; I think that you are right, that wire was connected to the gauge cluster when I bought it.

MRJB1929; After looking at it closely I agree that the center tab must be the ground, the F block is actually raised over the copper bus. You are probably right on the brown wire with black connector since I had originally marked it Tach (can not remember why. Then the green wire must be for the temp gauge? And for the voltmeter, just the B+ to the on the left side of that trio of tabs. That just leaves the fuel gauge sender so it must be on the right side tab of the trio!!

By the way, you might want to save that visit to FLA for sometime in say...January. By that time you will certainly be ready for some warm weather! We can go for a cruise by then (I HOPE).

How about that bolt/nut just over the O? I have run our of connections so that must not be for anything...Here is an updated photo with my understanding of your comments.

Thanks again for all of your assistance!!!