Thread: Need Help Snapped off bolt
Results 1 to 15 of 15
LinkBack URL
About LinkBacksThreaded View
-
05-04-2009 11:31 PM #7
CHR Member/Contributor
- Join Date
- Apr 2005
- Location
- bay city
- Posts
- 10,546
that i see that comes in the shop is some one using a 1/4 ez out to get out a 1/2 bolt and only 1/4 in . you drill it out with a 3/8 drill all the way thru the bolt . drive a ez out in. the deeper the EZ out is in the better it works in time you will know what is the best way to get busted stuff out. drilling all out and tapping. welding a nut on it. or a ez out last job had more then a ez out busted off in the hole .the tip to get dead center is a 4 flute end mill when the top of the bust bolt is flat not as hard to drill on center i drill studs out in the new alum heads the road salt rust them in for good so i dead center up on them in the mill .i drill to tap size for that bolt and tap themLast edited by pat mccarthy; 05-04-2009 at 11:58 PM.
Irish Diplomacy ..the ability to tell someone to go to Hell ,,So that they will look forward to to the trip
Reply With Quote
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
I know this is a little early but, this site is down more than it's up, so...................... Here's hoping everybody has a great holiday season and my best wishes for a great and prosperous new...
Merry Christmas and Happy New year