Thread: Need Help Snapped off bolt

Tweet

you are not going to drill out the ez out with just a drill.if a big bolt drill a long the side of the ez out .do this on both side of the ez out. now take a punch and try to loosen the ez out if this will not move it drill some more and drill deeper till it bust out. when you get it out center up on the bolt and drill thru the end of the bolt. go to the biggest ez out you can .if it can be put on a mill sometimes you can cut the junk out with a carbide ball mill they work better then a drill or find a tap blaster cut it out. it will burn up alot of time and will eat up ball mills and drills. you want to try not to bust any more stuff off in there like a drill i done some of this stuff from time to time when other shop bust them off in heads. i get the ez out out of the hole. i used a carbide ball mill in a hand drill them out if it can not go up on the mill