Thread: Electric SpeedO

Tweet

Originally Posted by sgo70

Sorry to hijack but I had a question like this a while ago and I'm still not sure.

I have Stewart Warner Guages and I have the sensor mounted on my tranny. It has three wires-red, black, white. Any ideas how to hook this up?? The gauge already has power to the signal and light then the signal wire runs down to the sensor.

I was told signal to white, ground black, and more power to red???

My sensor also came with the gauges.


Thanks

That is correct. Red to a switched hot , white toe the speedo and black you can ground at the tranny so you dont have to run it far

Thank, seems doable.
How does a GPS work, and all you have to do is plug it into your lighter/power socket, but shows real time speed?
Jack

Originally Posted by iceburgh

That is correct. Red to a switched hot , white toe the speedo and black you can ground at the tranny so you dont have to run it far

http://www.sw-performance.com/upload...ionsWiring.pdf

Here ya go......