I have a nice 9" ford rear out of a '58 Ford. One axle came out nicely, but the other is stuck big time. My slide hammer wouldnt budge it. I put the old drum back on reversed and beat the living #%$& out of it with a 5lb hammer, and still nothing. Then I attached 2 chains to the axle via the lugs, and hooked it to the bumper of my truck. I tied the other end of the housing to a large oak tree. And jerked the #%$& out of it, and STILL nothing. Yes all 4 flange bolts are off. Believe me after pulling it with my truck, I double checked to make sure. I also have been spraying WD-40 on what I can see of the bearing for 3 days, with no luck.

Any ideas? Who could I take this thing to? Maching shop? or maybe an 18 wheeler aligment shop? I am out of ideas.