Thread: T56 speedometer

Tweet

The T56 (stock sendor) has a 17 pulse per driveshaft revolution VSS signal generator incorporated into it. This has to get converted to a 2000 or 4000 pulse per mile signal for your VSS input to the Speedo (likely). There is a conversion box from Dakota Digital that does signal recalibration that converts it to match your speedo. It will also let you know via the LED's if you are getting a signal from the T56. Hope this helps...

The SW speedo is dip switch configurable for counting pulses but it is limited. Instructions have the setting set-up. The above mentioned box will allow you to zero it in if your set-up is outside the speedo's capability ..............

Kitz