Results 1 to 4 of 4
LinkBack URL
About LinkBacksHybrid View
-
12-03-2008 10:20 PM #1
CHR Member
- Join Date
- Jan 2006
- Location
- fort myers
- Car Year, Make, Model: '27 ford/'39 dodge/ '23 t
- Posts
- 11,033
These are usually a plug and play installation, not sure why you are having that problem. If the new Gennie parts don't fix it I would then call B &M and see what they think. Also, if you have another TH350 to compare it to you might want to try your shifter on it and see if it has the same problem or is ok.
Don
-
12-03-2008 10:23 PM #2
CHR Member
- Join Date
- Nov 2008
- Location
- Spokane
- Car Year, Make, Model: 33 American Austin/Bantam
- Posts
- 30
I second the above opinion. Usually a couple adjustments and your good to go......
-
12-05-2008 06:03 AM #3
CHR Member
- Join Date
- Nov 2004
- Location
- Gainesville
- Car Year, Make, Model: '81 X11
- Posts
- 73
Had a similar situation on a 4T60 with a B&M shifter. If the lever/arm on the trans has the wrong pin dimmention (from the sector shaft to the cable mount), the shift quadrents won't line up. How is the shifter in 2nd or low ? Could be the problem. D
Reply With Quote
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
I know this is a little early but, this site is down more than it's up, so...................... Here's hoping everybody has a great holiday season and my best wishes for a great and prosperous new...
Merry Christmas and Happy New year