Welcome to Club Hot Rod!  The premier site for everything to do with Hot Rod, Customs, Low Riders, Rat Rods, and more. 

  •  » Members from all over the US and the world!
  •  » Help from all over the world for your questions
  •  » Build logs for you and all members
  •  » Blogs
  •  » Image Gallery
  •  » Many thousands of members and hundreds of thousands of posts! 

YES! I want to register an account for free right now!  p.s.: For registered members this ad will NOT show

 
Like Tree32Likes

Thread: 1929 Essex Highboy
          
   
   

Reply To Thread
Page 1 of 21 1 2 3 4 5 6 7 8 9 11 ... LastLast
Results 1 to 15 of 303
  1. #1
    oldrodder43's Avatar
    oldrodder43 is offline CHR Member/Contributor Visit my Photo Gallery
    Join Date
    Jul 2007
    Location
    Ellsworth
    Car Year, Make, Model: 29 Essex RS Coupe
    Posts
    377

    1929 Essex Highboy

     



    With a little luck I might get some pictures of our '29 Coupe on here! My oldest Grandson (Steve) and I got this in September of 2007. Lucky find (for us) and not in bad condition considering some I've seen. Came home in pieces.
    Attached Images
    Too old to work, Too poor to quit.

    My build thread. http://www.clubhotrod.com/forums/showthread.php?t=39457

  2. #2
    Dave Severson is offline CHR Member/Contributor Visit my Photo Gallery
    Join Date
    Jul 2003
    Location
    Madison
    Car Year, Make, Model: '67 Ranchero, '57 Chevy, '82 Camaro,
    Posts
    21,160

    Looks to be in good condition!! Always liked the Essex cars, had a sedan once, got it about 70% done and found someone that wanted it more then I did!!! I'd say a real good find!
    Yesterday is history, tomorrow is a mystery, Live for Today!
    Carroll Shelby

    Learning must be difficult for those who already know it all!!!!

  3. #3
    oldrodder43's Avatar
    oldrodder43 is offline CHR Member/Contributor Visit my Photo Gallery
    Join Date
    Jul 2007
    Location
    Ellsworth
    Car Year, Make, Model: 29 Essex RS Coupe
    Posts
    377

    More of the Story

     



    So----------being as we were sucessful with the first batch, here is another segment. We found a bunch of flathead (and other) parts up in Monson, and while on our way back we stopped in to a backwoods auto grave yard to have a look. While there another guy came along, and seeing our trailer load of 'goodies', he spied a 3 speed tranny from a '49 ford F1 that we had. After some chit chat, he said he'd like to have it. Having made a 'deal' we followed him to his garage. While there he showed us a few of his rod projects, and pictures of completed projects he has done and sold. NICE. After a couple of hours, getting ready to leave, I told him we were looking for an old pickup or coupe project if he chanced upon something. To which he replied, "I've got just what you are looking for". On a later visit to his house, he showed us the Essex. And after an exchange of greenbacks, we made arrangements to come again with a trailer. The previous pictures are after the trip to get it a couple of weekends later. And now----------TA DAH, here is the first mockup. By the way, please forgive our humble workshop. It is an abandoned greenhouse with blue plastic tarps to keep the Maine weather out. But BIG, 30 ft. by 32 ft. Just cold/hot. haahaaaa.
    Attached Images
    Too old to work, Too poor to quit.

    My build thread. http://www.clubhotrod.com/forums/showthread.php?t=39457

  4. #4
    oldrodder43's Avatar
    oldrodder43 is offline CHR Member/Contributor Visit my Photo Gallery
    Join Date
    Jul 2007
    Location
    Ellsworth
    Car Year, Make, Model: 29 Essex RS Coupe
    Posts
    377

    Getting ready

     



    Next step was to build an elevated platform to assemble the parts of the body on, and to give us a flat surface to mock up the frame--yep, the usual 2 x 4 wooden version.
    Attached Images
    Too old to work, Too poor to quit.

    My build thread. http://www.clubhotrod.com/forums/showthread.php?t=39457

  5. #5
    oldrodder43's Avatar
    oldrodder43 is offline CHR Member/Contributor Visit my Photo Gallery
    Join Date
    Jul 2007
    Location
    Ellsworth
    Car Year, Make, Model: 29 Essex RS Coupe
    Posts
    377

    Power

     



    Meanwhile, back at the ranch---------we acquired a Chevy inline 6 motor, 230 cu.in. from a '69 Camaro (reasonable).* And a guy we bought some other 'junk' from gave us an old Model A frame.* It had it's faults, but for free?? We'll use it!! This pic also shows our new air compressor (home depot), this in November of '07.* Note that we haven't been able to use it (lack of 220 volt power) until November of '08.* hmmmm, warranty still good I wonder?Also here, parts of 2 x 4 (spruce) frame.* Well--------cheaper than steel.
    Attached Images
    Too old to work, Too poor to quit.

    My build thread. http://www.clubhotrod.com/forums/showthread.php?t=39457

  6. #6
    oldrodder43's Avatar
    oldrodder43 is offline CHR Member/Contributor Visit my Photo Gallery
    Join Date
    Jul 2007
    Location
    Ellsworth
    Car Year, Make, Model: 29 Essex RS Coupe
    Posts
    377

    Axle

     



    Started with an old Model A front axle, spring, bones----but the durned spring perch bolts offered some resistance, so out came the gas axe---
    Yup, you guessed it, ruinet it.
    So in our growing pile of jun---ehhh, parts, we had a front axle from a '49 ford F1. OK. Good. We cut off the parallel springs, then trimmed the mounting pads off. Got plans for home brew bat wings, thanks to my Mentor and new Friend from Florida!
    Also came up with a grille shell from a Model A (year unknown) that came with the radiator. Turned out we couldn't use the rad, but ???
    And with so much adverse comments about our wooden frame, I broke down and bought some 4 x 2 steel square tubing to replace it with.
    WOW, having a blast. Should've done this years ago!
    Attached Images
    Too old to work, Too poor to quit.

    My build thread. http://www.clubhotrod.com/forums/showthread.php?t=39457

  7. #7
    oldrodder43's Avatar
    oldrodder43 is offline CHR Member/Contributor Visit my Photo Gallery
    Join Date
    Jul 2007
    Location
    Ellsworth
    Car Year, Make, Model: 29 Essex RS Coupe
    Posts
    377

    Next page

     



    Well, how to hook steel to wood--------Cut the 'A' frame at the cowl line, figured that to be (easier) better than trying to replicate it from 4 x 2 steel.* OHHHH, watch out for the guard dogs!Forget the CATS, I got ratters here!!!!* Now cutting and fitting (to replace wood) the new steel pieces.* $$$$$$
    Attached Images
    Too old to work, Too poor to quit.

    My build thread. http://www.clubhotrod.com/forums/showthread.php?t=39457

  8. #8
    mach1joe's Avatar
    mach1joe is offline CHR Member Visit my Photo Gallery
    Join Date
    Oct 2008
    Location
    Livingston
    Car Year, Make, Model: 70 Mach 1 Mustang
    Posts
    83

    A true dedicated rodder. Looks good! Keep us informed.

    Essex with a Camero 6 cyl. Now that's original!!!

    Peace
    It's Just a Car!

    It takes a real MAN to build a hotrod - and not use chevy power!!?

  9. #9
    techinspector1's Avatar
    techinspector1 is offline CHR Member Visit my Photo Gallery
    Join Date
    May 2003
    Location
    Zephyrhills, Florida, USA
    Car Year, Make, Model: '32 Henway
    Posts
    12,423

    ...."Gas Axe"....

    Ladies and gentlemen, we have a winner!!!!!!!
    ROTFLMAO, never heard that before. Thanks for that.
    PLANET EARTH, INSANE ASYLUM FOR THE UNIVERSE.

  10. #10
    redrodman48's Avatar
    redrodman48 is offline CHR Member Visit my Photo Gallery
    Join Date
    Oct 2005
    Location
    Victoria
    Car Year, Make, Model: 65 gto
    Posts
    255

    Cool project, I had a 29 Essex couple about 3 years ago, they are pretty rare
    bodys to find these days, if interested the resto can be seen here
    www.automotivesheetmetel.com If you need parts i have a few sites i can
    Im you.
    Confusious say: He who dies with the most toys, Wins

  11. #11
    oldrodder43's Avatar
    oldrodder43 is offline CHR Member/Contributor Visit my Photo Gallery
    Join Date
    Jul 2007
    Location
    Ellsworth
    Car Year, Make, Model: 29 Essex RS Coupe
    Posts
    377

    Hey Redrodman, that Essex rebuild looks great. I would like to see shots of the roof build, is it wood like original? I have been thinking (worrying) about that ever since I brought it home. I need two good doors, but probably can't afford them. My passenger door is from a '27-28, and is rotten inside. My driver door is from a '29, but also is in very poor shape. Thanks for the post. Perley
    Too old to work, Too poor to quit.

    My build thread. http://www.clubhotrod.com/forums/showthread.php?t=39457

  12. #12
    redrodman48's Avatar
    redrodman48 is offline CHR Member Visit my Photo Gallery
    Join Date
    Oct 2005
    Location
    Victoria
    Car Year, Make, Model: 65 gto
    Posts
    255

    Whoops I spelt sheetmetal wrong. Well at least you knew what i meant.I dont
    know too much about the roof other than he filled it. On the website it has
    Scotts ph # give him a shout Im sure he`d be glad to yak to you about it.
    Tell him Bill from Victoria sent you. Hers a site that may be helpfull yo ya.
    www.restored-classics.com , click on Hudson parts,and then on the blue
    section on the right ,click on Essex
    Confusious say: He who dies with the most toys, Wins

  13. #13
    J. Robinson's Avatar
    J. Robinson is offline CHR Member Visit my Photo Gallery
    Join Date
    Jul 2003
    Location
    Titusville, FL
    Car Year, Make, Model: 31 Ford Coupe; 32 Ford 3-window
    Posts
    1,782

    Hi Perley. I see you got your thread up & going. There are some pictures here I hadn't seen before... Your grille shell is probably a '28 (Model-A). The '29's were chromed from the factory; '28's were painted. That's assuming it's a passenger car shell. It's my understanding that some '29 commercial shells were painted, too. Maybe some of the Model-A experts can clarifiy that.

    There's nothing sweeter sounding than an inline six with split exhaust manifold and dual glasspack mufflers...

    I've heard a torch called a "blue wrench", "smoke wrench", "hot wrench", and a "Mexican speed wrench", but "gas axe" beats 'em all. That's a good one...
    Jim

    Racing! - Because football, basketball, baseball, and golf require only ONE BALL!

  14. #14
    oldrodder43's Avatar
    oldrodder43 is offline CHR Member/Contributor Visit my Photo Gallery
    Join Date
    Jul 2007
    Location
    Ellsworth
    Car Year, Make, Model: 29 Essex RS Coupe
    Posts
    377

    And more

     



    Here's another pic of the mock up. And a shot of the dashboard. An interesting note here-----the '29 was unique among the Essex family as it had pine cone/tree branch motiff, as you might see (sort of) on the instrument panel. It is my understanding that this was the only year for that. Not widely accepted by the buying public I guess. The door and window handles had that also. Must have been nice!
    OOOOOPPS, sorry, we actually do have 'watch cats' too. This one also a first class mouser (and birder). 3 of them total. Actually 4, but one is strictly an inside cat.
    Found a bargain on a Chevy S-10, '91 vintage, from which we got a Borg Warner T-5 manual 5 speed tranny. Here it is along with a picture of the older S-10 rear. This one is from a 4 x 4 truck and these are 5 inches wider than the two wheel drive version. And just so you know up front that I do (more than) my share of wrong things, here is a shot of a Camaro bell housing I bought off ebay. I was told that any SBC bell housing would fit my Inline 6 and adapt to the T-5 tranny. Well---------not quite. The eighties versions had this "60 degree" tilt. UGH. Eventually I did find a proper one (90 degree).
    Attached Images
    Too old to work, Too poor to quit.

    My build thread. http://www.clubhotrod.com/forums/showthread.php?t=39457

  15. #15
    oldrodder43's Avatar
    oldrodder43 is offline CHR Member/Contributor Visit my Photo Gallery
    Join Date
    Jul 2007
    Location
    Ellsworth
    Car Year, Make, Model: 29 Essex RS Coupe
    Posts
    377

    Still more

     



    Here is a shot of the '49 front axle after cutting off the 4 bolt hole mounting flanges. I shake a lot with the torch going! I'm real good at grinding though! haahaa And a shot of the input shaft of the T-5 transmission. This had to be cut off by 9/16 ths of an inch, also the bearing retainer the same amount, so it would fit the crankshaft hole and bushing in the Inline 6 engine. What a tussle I've had with that combo, I-6 and T-5. WOW. The bell housing thing, the need for cutting the input shaft and bearing retainer, and finding a flywheel, pressure plate and clutch plate, all to fit this combo! I've read everything I could find pertaining to the T-5's on the Internet. Just when I would say, AHA, another wrinkle would turn up. Finally got a 13 inch flywheel from a SBC off ebay, then a pressure plate (and I thought) a clutch plate from a fellow hot rodder friend, only to find that the clutch plate had a different number of 'gear' teeth on the hub than the tranny. In the end I had to get one 'special' from Fort Wayne Clutch and Driveline! Thanks folks. Great experience, that. And here is a shot of the mockup table with a relief hole for the 'pumpkin' so I could mock up the rear axle. And the rear axle in place under the 'floor'. The 4 x 4 rear end is perfect in width for this application. And driven from the six cylinder, it should last forever!
    That's it for this segment. They are going to be rapid-fire because I've been working on it for over a year. Just now got up courage to try the build site thing, thanks to my Mentor! Thanks Friend. Perley
    Attached Images
    Too old to work, Too poor to quit.

    My build thread. http://www.clubhotrod.com/forums/showthread.php?t=39457

Reply To Thread
Page 1 of 21 1 2 3 4 5 6 7 8 9 11 ... LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Links monetized by VigLink