1948 turtle back

[vintageiron]

you guys were so helpful with my dodge panel maybe you could help me with my 1948 plymouth 4 door sedan i need rockers cant find them anyware any suggestions i really dont want to try to make them there too long
thanks Ray

[Itoldyouso]

Thought I should jump in and let you know your question isn't being ignored, but rather it is just that there are not a lot of parts sources for cars outside the mainstream. Not that your car is odd, but it is just not as popular as lets say a 48 Ford, so the parts manufacturers are not as apt to want to make parts for them. They have to devote their resources to cars where they have a better shot at selling a LOT of parts rather than a limited number.

If no one here is able to help, you might consider one of the make or model speciific forums. I don't know what forums there might be for your car, but Google is your friend. Good luck.

Don

[ford2custom]

Don, I thought since I had a couple of old Plymouth’s 41 Special Deluxe Coupe and a 51 Cambridge 2 dr. I would pass along some of the links.


Vintageiron,
This should be a start to finding what you need hopefully.

http://www.oldplymouths.com/homepage.html


http://www.plymouthbulletin.com/links.htm

Check out the 1931 Chrysler Imperial CG Roadster on this gallery link below. Who among us would not like to have that car in our garage? There are a lot of nice cars on this site.

http://oldcarandtruckpictures.com/Chrysler/


http://www.plymouthbulletin.com/links.htm

You can link to a lot of other model cars so I thought I would put this one in also for the Fords. There are some nice Fords out the black 32 roadster.

http://oldcarandtruckpictures.com/Ford/



Richard

[falconvan]

I bought a set off of Ebay last year from someone that was reproducing them. Also you might try www.theplymouthdoctor.com.