Space considerations make me want to run a straight axle on the front of the latest project. Will be using 61 Pontiac spindles modified to fit the axle. Modification will put the spindle centerline just below the top of the kingpin boss. Front suspension will be a 3 link with parallel torsion bars and panhard bar. Draglink is the same length as the 3link bars and does swing in the same arc so no bumpsteer. Torsion bars will use a link attachment to the axle so caster has much adjustment but initial at 5dg. Camber at 1 dg positive. Toe to be determined. 195/60-14 fronts and 295/60-16 rears. Fronts will present
15/16" scrub. Steering is 5 turns l-l with a 8" pitman.
After all that I forgot my original question. I'm 63 , cut me some slack.
So what do you think? Did I miss something that is going to jump up and bite me in the*?