Welcome to Club Hot Rod!  The premier site for everything to do with Hot Rod, Customs, Low Riders, Rat Rods, and more. 

  •  » Members from all over the US and the world!
  •  » Help from all over the world for your questions
  •  » Build logs for you and all members
  •  » Blogs
  •  » Image Gallery
  •  » Many thousands of members and hundreds of thousands of posts! 

YES! I want to register an account for free right now!  p.s.: For registered members this ad will NOT show

 

Thread: Running e brake cables using junk
          
   
   

Results 1 to 2 of 2

Threaded View

  1. #1
    hotrodtrux is offline CHR Member Visit my Photo Gallery
    Join Date
    Apr 2008
    Location
    some where in the middle
    Posts
    40

    Running e brake cables using junk

     



    When it came time to run the cables on my truck I was kind of stuck. I couldn't run the cables under the frame due to the suspension. If I went over the frame it was close to the box sides and it didn't lay out very well. My friend suggested we go through the frame. I got a piece of 3/4 inch gas pipe out of the dumpster at work and we went to work. An hour and a half later it was done and I think it turned out pretty nice.
    Attached Images

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Links monetized by VigLink