I have a 9100 Powermaster mini starter. The solenoid posts are side by side not up and down like OEM. The battery terminal is on the engine side. Considering all the routings I could take, it seems like I come too close to the other terminal or come close to the exhaust. I am thinking about putting a tight 90 degree bend on the battery cable terminal end, come over top of the solenoid. There is no divider between the two posts to I will be close. Then route back to the battery mounted on the frame under the pass seat. I will be close to trans cooling lines. The other option is to come from the frame, go UNDER the starter motor and circle around from the engine side. This way seems odd. What am I doing wrong?