Quote Originally Posted by IC2
.... The Vintage Air - the schematic says hook up the pink and green wires to the 87A speed control relay.....where are they? There are no pink and green wires, they're orange and red instead....
On a Vintage Air system, there are usually 2 relays; a power relay, and a fan relay, and they are pre-wired from the factory.
The only wires you should need to hook up are the red wire to the battery via a supplied circuit breaker (I connect this to the BATT terminal on the ignition switch when I use an AAW kit), the orange wire which is connected to the accessory terminal on the ignition switch (to trigger the power relay and turn the system on and off with the key), and a blue wire to the compressor clutch (preferably wired through the binary switch, or a trinary switch if you have an electric radiator fan).

Joe G.