Printable View
Short of removing an axle, is there any way to find out what spline axle i have? the tag is still on the assy. if thats any help.
i'm looking to get a taller ratio and not have a limited slip as this is for a dailey driver, no racing or off roading.
thanks
other than getting sweaty and a bit greasy, its only a 30 min job.that way you will know for sure. more than likely its a 28 spline. what did it come out of?
the tag on the pumpkin says on the top line: WFF-B 1EC
bottom line : 3L50 9. 3 361A
from what i can gather it's a 3:50 ratio with limited slip, i'm not sure how to
decode what year and what it came out of.
Kevinstang's Ford Nine Inch Differential Page +
Might help out a bit....note the part about the hub end of the axle. 28 spline have a rectangle shape in them. 31 spline a small hole in the center with 2 outer holes on each side. That should tell you spline count.
Cant seem to find a 9 with a WFF , must be alot newer then anyone has documented yet .
WDM-AH 3.25:1 9
WCZ-S 3.50:1 9 WCZ-T 3.50:1 9
WDC-DW 2.75:1 9 WDC-EB 2.75:1 9
WDC-EE 3.00:1 9 WDC-EH 2.75:1 9
WDC-EK 3.00:1 9 WDC-EL 2.50:1 9
WDC-EM 2.50:1 9 WDX-E 2.75:1 9
WCZ-H 3.89:1 9 WCZ-J 4.11:1 9
WCZ-P 3.50:1 9 WCZ-R 3.89:1 9
WFU-E 4.30:1 9 WEB-BF 2.50:1 9
WEB-BK 3.00:1 9 WEB-BM 2.75:1 9
WES-F 3.00:1 9 WES-G 3.25:1 9
WES-H 3.50:1 9 WES-J 3.89:1 9
WES-K 3.50:1 9 WES-M 3.25:1 9
WES-N 3.00:1 9 WES-P 3.25:1 9
WES-R 3.25:1 9 WES-T 2.75:1 9
WES-T1 2.75:1 9 WES-U 3.50:1 9
WES-V 3.00:1 9 WES-Y 3.50:1 9
WES-Z 3.00:1 9 WES-AA 3.00:1 9
WES-AB 3.25:1 9 WES-AC 3.00:1 9
WES-AD 3.25:1 9 WES-AE 3.50:1 9
WES-AG 2.75:1 9 WES-AH 3.00:1 9
WES-AJ 3.25:1 9 WFA-AA 3.00:1 9
WFA-AH 3.00:1 9 WFA-AL 2.75:1 9
WFB-A 3.25:1 9 WFB-C 3.25:1 9
WFB-D 3.00:1 9 WFB-G 2.50:1 9
WFB-K 2.50:1 9 WFD-A 3.50:1 9
WFD-B 3.91:1 9 WFD-C 4.30:1 9
WFD-D 3.91:1 9 WFD-E 4.30:1 9
WFD-F 3.50:1 9 WFD-J 3.25:1 9
WFD-K 3.00:1 9 WFD-L 3.00:1 9
WFD-M 3.25:1 9 WFG-AL 3.00:1 9
WFG-AA 2.75:1 9 WFG-BJ 2.75:1 9
WFV-T 2.75:1 9 WFY-A 2.75:1 9
WFY-K 3.00:1 9 WGB-V 2.75:1 9
WGB-W 3.00:1 9 WGB-AB 2.50:1 9
WGB-AD 2.75:1 9 WGC-A 2.75:1 9
WGC-K 2.50:1 9 WGC-N 2.75:1 9
a little more info if it helps
From what I under stand all the 4X4 fords are supposed to be 31 spline. Kurt
Thanks Guys,
It has a small hole in the center of the axle head and two large ones on the outer edge.
Early Broncos (1966-1977) had 28 spline axles. No help on the axle code though.Quote:
Originally Posted by vara4
Mark
Quote:
Originally Posted by chopnchanneled
Sounds like 31 spline then.
yep my early bronco in my ford F! is 28 spline.Quote:
Originally Posted by Mark in Memphis