Threaded View
-
03-10-2008 10:10 AM #3
Fuel System Setup
Alright I know for this motor I will need a high pressure pump, I found out that the 5.3 needs 55-62 PSI to run and that a S-10 Blazer with the 4.3 needs 60-66 PSI.
With that said I am assuming I should be able to use the S-10 tank for my swap, but don't know for sure since I am still kind of learning about all this fuel Injection stuff
If anybody is good with FI, feel free to chime in w/ some opinions
John's ride to the cemetery, his beloved Billings OK bus, The Baby Elephant!! Traveling in style!! - -
John Norton aka johnboy