I am finally getting around to upgrade the suspension and brakes in my 37 chevy p/u and since its going to get disc brakes I am going to adapt a dual master cylinder,since I am using the original pedals I am going to have a problem with most master cylinders. I need a master cylinder that has the holes for the lines on the opposite side as its going to be tight in between the master cylinder and trans,the truck has a 235 and I am adapting a T-5 so I have to use the original pedals. When looking at a master cylinder in a late model car/truck application the holes for the lines are most likely on the inner fender side and I need one that has them on the motor side so when mounted on the original pedal assembly the lines are comming out towards the drivers side frame rail where I have plenty of room, Does anyone know a vehicle where the lines come out on the motor side of the master cylinder as I want to use one I can get at the parts store reasonable instead of one from a specialty manufacure. Jeff