Lokar petal went in today. It seemed like it would be easy but took a trip to hardware store for longer screws and several hours later I finally got it in. The hole for the linkage and drilling the screws was the easy part, trying to get them into the base plate under the floor board was a different story. There must be at least three layers of metal in some spots, all kind of tweaking each screw. Anyway it feels good to have it almost done, just need to mount the cable when it comes tomorrow. here is a couple of shots, with a piece of paper propping it up, since it isn't hooked up to the engine. I also cut a few scaps of sheet metal to fill the gaps around the brake petal and steering column.