Yeah this one lasted over a year before blowing! In all the years I've done oil changes never had this happen, but you can bet it won't happen again until dementia sets in! LOL
Printable View
Yeah this one lasted over a year before blowing! In all the years I've done oil changes never had this happen, but you can bet it won't happen again until dementia sets in! LOL
It wouldn't had made it 2 blocks if you started to drive it though. :LOL: You got lucky it showed it's self for you now and saved you a tow and aggravation.
Time for an overdue Update. After working a lot of overtime I was able to replace all the dented and rusted fenders, and replace the fiberglass with steel running boards and front and rear fenders, as well as steel inner front fenders. I then reached out to my mechanic friend who recommended I talk with his painter friend about how to proceed with painting. I am using Summit Racing. It is a Single stage Acrylic Urethane "Royal Blue Pearl" that with have the appropriate layering of base epoxy primer also summit, and then high build prime followed by top coat. This paint system does not use clear coat which is fine for me. Randy's paint shop friend agreed I should prime all the new steel parts separate from the Body, then do any dents with Bondo, followed by high build primer . At that point, I will bolt everything on, and if I can afford it have his shop do the top coat finish paint. This will take some time as its getting to cold and potentially too wet to do any painting until spring. That's the plan at least!! Might get friend across street to do some minor repairs to the hood, and the bed of truck will need some plug welding and filling the best that I can, because buying a new bed is not in the budget!. I've purposely stopped working on the truck over the last few years as I realized the former owners put a lot of bondy all around the truck, directly over the rusted fenders, to where there was no point in painting until that was delt with, so now it's time to move forward once again. It helps also taking things slower to think out where I want to go with this project.
any way here is a picture of the now filled garage space of all the new steel parts.
https://hosting.photobucket.com/imag...zfMXLkL3eu.JPG
https://hosting.photobucket.com/imag...MQqLwtVdoG.JPG
https://hosting.photobucket.com/imag...YiQBb9UU8R.JPG
https://hosting.photobucket.com/imag...8Ts2Q5ueey.JPG
Baby steps are forward progress! Congrats on the new parts!
Looks like Xmas in there! What'cha gonna do with the parts you take off?
I sold off most of the rusty and heavily dented stuff on craigslist. Looking for a home for the fiberglass running boards