Rattle Elimination

I figured it would be a good weekend to start putting the new floor pans in my 76. Managed to get the passengers side in and am working on the drivers side now. Part of the passenger side had to be re-tacked at the bottom of the inner and outer rockers. While I was starting to squeeze the pieces back together I noticed that there was something in the rocker. Fortunately there's the little plate in the front of the rocker for access. Here's the 14" pipe wrench that was in that side.


and the 35 mm lenses and 3 stove knobs that were in the other side. Kind of glad I found them now rather than latter.

Sure would have made for some good rattles later on down the road!!!!