Results 1 to 4 of 4
Threaded View
-
10-05-2007 05:20 PM #1
48 Ford F1 with 460 V8 Electrical issues
Hi
I recently bought a 1948 Ford F1 with a 460 v8 under the hood I can crank it over, but get no spark. I put a new coil in as the old one was missing. The former owner bought it running six years ago. So I replaced the coil, (it has a standard ignition) and checked for spark - none. The wire going to the + side of the coil is hot and registers 12volts on the meter, with the key on. If I cross the coil to the negative side of the coil with the meter going from positive to negative, I get o volts. I'm thinking the wiring in the distributor may be wrong but lack a schematic to go from here, any advice would be appreciated. Steve.
I've had a lot of BIG things happening to me lately but now I'm back to working on the car some, it feels good! The tranny mount was bad and that helped put everything back where it should be....
SB distributor won't fit