Results 1 to 2 of 2
LinkBack URL
About LinkBacksThreaded View
-
09-24-2007 06:41 PM #1
CHR Member
- Join Date
- Oct 2005
- Location
- Mnpls
- Car Year, Make, Model: between cars
- Posts
- 348
front brake hose frame attachment and more ???????
Got the front MII front suspension right. Now its time for the brakes and lines, along w the Speedway 11" front brake kit I ordered the braided hose kit. but now i am not sure where to weld on the attaching tab for the frame end of the hose or how much slack I should build in. - over or under the chassis -Anyone?
next - the disributing valve/fitting inline between the front discs - can I use any one off a donor car or are they design use specific?
here is my planned setup- under floor mounted Ford nonpower Dual MC 2# residual inline w that block to distribute the fluid forward to the 11" discs
from MC back to 10# residual next a adjustable Proportioing Valve then rear drums , Am I right
?
Last edited by Dgas56; 09-23-2008 at 03:47 PM.
Reply With Quote
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
Sprayed the cab, it's a long story, I had to re shoot it. Color sanding and buffing it now.
Stude M5 build