I need to do something about coating my floors, inner fenders, chassis, under side of bed floor, etc of my 66 F100, my new 76 F150 4x4, and my 46 Chrysler 3 window coupe. I have always used POR-15 for things like this and it was always fine for me but I have been reading around and hearing all sorts of things about other brands being better than POR-15 and also Eastwood has their thing about how their Rust Encapsitor (sp) beat POR-15 in some test a cataloge or magazine did...
Anyway's what would you recommend for something like this? All my vehicles has surface and scale rust all over the floor, etc and I just pressure washed all the oil, dirt and scale off both of my Ford trucks and would like to use some kind of Marine clean deal then use something that converts the rust BEFORE I use a coat of POR-15 or something that seals it. I know that it's supposed to seal it and keep it from comming through but I want something that actually rids of it or converts it before I seal it so I KNOW it wont come back years down the road.
I am going to get probably 2 or 3 gallons of whatever it is (1 gallon at a time) so I can do EVERYTHING such as inside the doors, under the hoods, in gaps, in the cowl vents, etc.
I'd appreciate any information on any products YOU PERSONALLY used and pro's and con's on them.
Thanks a lot for any help here guys!