Hybrid View
-
08-02-2007 08:30 AM #1
You're going to need a wiring diagram for the column that you are using,it will show exactly which signal light to where. As a general rule,there will be two green,and two yellow ,with the lighter colored ones for the front turn signals. Hope this helps you,Hank
-
08-02-2007 08:59 AM #2
Buy a 12v test light now if you don't already have one.
Even with the diagram you'll need to play around with what goes where . It's not that bad, it just takes a while your first time figuring why it worked a few minitues ago but not now... when that happens, check your grounds, then the bulb ,before you go thru all the wires your playing with .
good luck
T L"Whad'ya want for nuth'N, ..............aaa,rrrrrubber biscuit... ?"
"bad spellers of the word untie ! "
If your wondering how I'm doing I'm > " I'm still pick'N up the shinny stuff and passing open windows"
I've been checking in and figured the site had died forever. I checked today and bam it's back on. Awesome. I don't contribute much here, I just come to read and enjoy hotrod builds and good company...
Back online