Thread: One way to build a gas tank
Hybrid View
-
07-02-2007 07:33 PM #1
One way to build a gas tank
I'm working on my roadster, it was time to make the gas tank so I thought I would share how I do it.
First I figure out where I want it, on this car I want it in the rear under the rolled pan. I'm using the LS7 427 cu. in. motor. I'm getting a little over 30 mpg out of the engine I have been testing. So, knowing I'm going to use this car to drive long distances I want the tank as large as possible.
I made a tank out of Styrofoam and cut and fit to fill every nook and cranny that I could.
Than I took that to work and had a guy make a drawing of it. Took the drawing to a company that does Lazar cutting and had them cut it out of 1/8 inch 6061 aluminum and then welded it up.
and there ya go a 14 gallon gas tank.
cost $80.00.
I have had custom tanks made for me before, they charged $600 to $800.
Ken
-
07-02-2007 07:44 PM #2
That's really beautiful Ken. The styrofoam idea is a good one too. You guys that live in California have it made with laser cutting shops and all that you can go to. That was the one thing I noticed when we lived there, you can find tons of places that do work that you simply can't find in lots of other places.
High tech in Fort Myers is that we have a sandblast shop near by.
Don
-
07-02-2007 08:31 PM #3
Originally Posted by Itoldyouso
That lazer cut sheet stock really makes the job start nice doesn't it? Tank looks very nice.Your Uncle Bob, Senior Geezer Curmudgeon
It's much easier to promise someone a "free" ride on the wagon than to urge them to pull it.
Luck occurs when preparation and opportunity converge.
-
07-03-2007 09:22 AM #4
Ken that tank is a beauty. I have a custom built 15 gallon aluminum tank in my 34, but I must say that your builder did a very clean job on your seams. Mine is no where as nicely done.Bob
A good friend will come and bail you out of jail....but a true friend will be sitting next to you saying..."Damn....that was fun!
-
07-03-2007 10:02 PM #5
Don - Thanks, did you notice I didn't put any resin on my Styrofoam? Sorry couldn't pass it up!
Happy Birthday,
Ken
Bob - It's like what you guys were saying earlier having the right tools makes all the difference. Thanks
Ken
Mopar34 - Thanks, I will pass that compliment on to my builder.
-
07-03-2007 10:12 PM #6
Ken, when I saw the styrofoam I had the same thought. I was gonna bust your chops a little, but then I said NAAAAAAAAAAAAAAAH !!
Don
on small cars yes. but fat fender cars are pretty much the same in size and weight as the donor car. i found s10 brakes work great on fat fender and pickups. a deuce will just need manual brakes...
Time for brakes