Thread: winters q/c question gear placement

Tweet

question is the car is street use , i bought a set of gears to achieve 374 ratio , now the gears will go on either way in the rear cover but which one goes on top and which on bottom ?? the input shaft is on the bottom , does that mean the larger one goes there or the small one?

Set 20 is a 20 tooth gear and a 26 tooth gear. From the Winters page
http://www.wintersperformance.com/ca.../index1024.htm On page 18 there is a chart
if you put the 20 on the bottom, you will have a 3.17
if you put the 20 on the top you will have a 5.36

These are from the 10 spline 4.12 ring and pinion chart.
If you have six spline gears, look at the other chart.

Mike in Tucson