Printable View
have 80 chev trk, drivers side power window has been working
fine until today. let it down, now it won't come back up. getting
fire to switch, and passenger window works fine. anybody have
any ideas as how to check switch or mtr to find out problem.
rdobbs
You will have to pull the door panel to see if the window has come off the track. If it's still on the track you can troubleshoot the motor and wiring with a VOM.
had a passenger window motor that wouldn't work on my 84 vette.
held in with rivets, i started whacking away with hammer and chisel.
gave the switch one last try to find out the hammering had evidently gotten the motor brushes to work properly. alas this was a less used passenger window, but worth a try.
You can check the switch by substituting the switch from the other side. It should just pop out without taking the door panel off. If it works with the new switch, you know to replace it. If not, good luck!
I took off inside panel of door, got a long bar
and hit the power motor a few times, and all
is working good now. probably stuck brushes.
thanks for all your help
rdobbs
It probably had some moisture inside. I would suggest to do some boneyard searching for a rebuildable one as I think that one is living on borrowed time.